Free Shipping
Of: $0.00Per: $153.00ou X de
Price on sight: $153.00
| Benefits | 800 Watts 4 Channels 1 or 2 Ohms Small size Efficient Crossover HPF and LPF Full Range |
|---|
| Number of Channels | 4 Channels |
|---|---|
| Maximum Power | 1 Ohm: @12.6VDC – 1 Ohm: 800 Watts RMS (4 x 200 Watts RMS) @12.6VDC - 2 Ohms: 544 Watts RMS (4 x 136 Watts RMS) 2 Ohms: @12.6VDC – 2 Ohms: 800 Watts RMS (4 x 200 Watts RMS) @12.6VDC - 4 Ohms: 544 Watts RMS (4 x 136 Watts RMS) 2 Bridged Channels: [1 Ohm] @12.6VDC - 2 Ohms: 400 Watts RMS (2 x 400 Watts RMS) [2 Ohms] @12.6VDC - 4 Ohms: 400 Watts RMS (2 x 400 Watts RMS). |
| Frequency Response | Full Range: 10Hz ~ 22KHz (-3dB) |
| Crossover High Pass (HPF) | 90Hz (-12dB/8th) Fixed |
| Crossover Low Pass (LPF) | 90Hz (-12dB/8th) Fixed |
| Bass Boost | - |
| Efficiency | - |
| Output Impedance | Single Channel: DS 800X4 1 Ohm: 1 Ohm DS 800X4 2 Ohms: 2 Ohms Bridged Channels: DS 800X4 1 Ohm: 2 Ohms DS 800X4 2 Ohms: 4 Ohms |
| Minimum Supply Voltage | 9VDC |
| Maximum Power Supply Voltage | 16VDC |
| Positive / Negative Power Supply Cable | 7 AWG (10 mm²) |
| Output cables wire gauge | 15 AWG (1.5 mm²) |
| Remote Cable | 18 AWG (0.75 mm²) |
| Protection fuse or circuit breaker | 60A |
| Dimensions (W x H x D) | 6.81" x 2.05" x 8.94" (173 x 52 x 227 mm) |
| Weight | 3.15 lbs (1.43 Kg) |
DS 800x4
The DS 800×4 is synonymous with multichannel amplifier. It has 4 channels of 200 Watts RMS, with a maximum power of 800 Watts RMS, at 1 or 2 ohm and is compatible with any frequency, that is to say, it is a FULL RANGE amp. Versatility, efficiency and quality in a single product.
INPUT Inputs of signals to be amplified. LEVEL It sets the amplifier input sensitivity, which allows an optimal adjustment to the output signals levels. CROSSOVER Set the operating mode of amplifier.
OUTPUT To connect the speakers. POWER The connector terminal (+) must be connected to the battery's positive pole with a 10mm² (minimum) wire gauge. The connector terminal (-) must be properly connect to the battery's negative pole with a same wire gauge.
| Operation Class | Class D |
| Number of Channels | 04 |
| Maximum Power | @ 12,6 VDC - 1 OHM: 800W RMS (4 x 200W RMS) @ 12,6 VDC - 2 OHMS: 544W RMS (4 x 136W RMS) |
| Input Sensitivity | 250mV |
| Frequency Response | 10Hz to 36KHz(-3dB) |
| Crossover High Pass (HPF) | 90Hz (-12dB/8th) Fixed |
| Crossover Low Pass(LPF) | 90Hz (-12dB/8th) Fixed |
| Protection System | Output overload |
| Maximum Music Consumption | @12.6VDC: 51A |
| Maximum Consumption in Sinusoidal Signal | 102A |
| Dimensions(W X H X L) | 7.17" x 2.05" x 8.94" |
| Weight | 3.52lb |
| Operation Class | Class D |
| Number of Channels | 04 |
| Maximum Power | @ 12,6 VDC - 2 OHMS: 800W RMS (4 x 200W RMS) @ 12,6 VDC - 4 OHMS: 544W RMS (4 x 136W RMS) |
| Input Sensitivity | 250mV |
| Frequency Response | 10Hz to 22KHz (-3dB) |
| Crossover High Pass (HPF) | 90Hz (-12dB/8ª) Fixed |
| Crossover Low Pass(LPF) | 90Hz (-12dB/8ª) Fixed |
| Protection System | Output overload |
| Maximum Music Consumption | @12.6VDC: 43A |
| Maximum Consumption in Sinusoidal Signal | 86A |
| Dimensions(H X W X D) | 7.17" x 2.05" x 8.94" |
| Weight | 3.52lb |
1 year warranty
Taramps recommends that the installation be done by a specialized professional and is not responsible for the misuse of the product.
Taramps Group