Free Shipping
Of: $0.00Per: $92.00ou X de
Price on sight: $92.00
DS 250x2
The DS 250×2 is designed with a size that fits in your hand. This amplifier was made for those who like to hear the full range of frequencies, bass, mid and high as well, and for that reason, it suits all types of customers and car audio systems. It is stereo, has 2 channels of 125 Watts RMS at 2 ohms or 1 bridged channel with 250 Watts RMS at 4 ohms. The perfect car audio style for you!
INPUT Inputs of signals to be amplified. LEVEL It sets the amplifier input sensitivity. HIGH PASS (HPF) Determines the beginning of the amplifier operating frequency, when select HPF mode. CROSSOVER Set the operating mode of amplifier.
OUTPUT To connect the speakers. POWER The connector terminal (+) must be connected to the battery's positive pole with a 4mm² (minimum) wire gauge. The connector terminal (-) must be properly connect to the battery's negative pole with a same wire gauge
| Operation Class | Class D |
| Number of Channels | 02 |
| Maximum Power | @ 12,6 VDC - 2 Ohm: 250 Watts RMS(2 x 125W RMS) @ 12,6 VDC - 4 Ohm: 158 Watts RMS(2 x 79W RMS) |
| Input Sensitivity | 250mV |
| Frequency Response | 8Hz ~ 45Hz (-3dB) |
| Crossover High Pass (HPF) | 80Hz ~ 2.2KHz (-6dB/8ª) Variable |
| Crossover Low Pass(LPF) | 80Hz (-12dB/8th) Fixed |
| Protection System | Output short circuit |
| Maximum Music Consumption | @12.6 VDC: 13A |
| Maximum Consumption in Sinusoidal Signal | 26A |
| Dimensions(H X W X D) | 6.30" x 1.73" x 4.49" |
| Weight | 1.03lb |
1 year warranty
Taramps recommends that the installation be done by a specialized professional and is not responsible for the misuse of the product.
Taramps Group