Of: $0.00Per: $324.00ou X de
Price on sight: $324.00
DS 1200x4
The DS 1200×4 is synonymous with multichannel amplifier. It has 4 channels of 300 Watts RMS, with a maximum power of 1200 Watts RMS, at 2 ohm and is compatible with any frequency, that is to say, it is a FULL RANGE amp. Versatility, efficiency and quality in a single product.
INPUT Inputs of signals to be amplified. LEVEL It sets the amplifier input sensitivity, which allows an optimal adjustment to the output signals levels. CROSSOVER Set the operating mode of amplifier.
OUTPUT To connect the speakers. POWER The connector terminal (+) must be connected to the battery's positive pole with a 16mm² (minimum) wire gauge. The connector terminal (-) must be properly connect to the battery's negative pole with a same wire gauge.
Operation Class | Class D |
Number of Channels | 04 |
Maximum Power | @ 12,6 VDC - 2 OHMS: 1200W RMS (4 x 300W RMS) @ 12,6 VDC - 4 OHMS: 768W RMS (4 x 192W RMS) |
Input Sensitivity | 250mV |
Frequency Response | 9Hz to 27KHz (-3dB) |
Crossover High Pass (HPF) | 90Hz (-12dB/8th) Fixed |
Crossover Low Pass (LPF) | 90Hz (-12dB/8th) Fixed |
Protection System | Output overload |
Maximum Music Consumption | @12,6VDC 67,5A |
Maximum Consumption in Sinusoidal Signal | 135A |
Dimensions(H X W X D) | 7.17" x 2.05" x 11.06" |
Weight | 4.62lb |
1 year warranty
Taramps recommends that the installation be done by a specialized professional and is not responsible for the misuse of the product.