Taramps 400 Trio 3 Channels 400 Watts RMS Amplifier 2 Ohm

Free Shipping

  • Shipping Company
  • Payment Method
  • Direct from the factory
Taramps 400 Trio 3 Channels 400 Watts RMS Amplifier 2 Ohm

Por: $108.00

Preço a vista: $108.00

BUY NOW

Características

Benefits400 Watts
3 Channels
2 OHM
Small size
Efficient
Trio boxes

Technical features

Number of Channels3 Channels
Maximum Power- LOW WAY

@14.4VDC - 2 Ohms: 340 Watts RMS
@14.4VDC - 4 Ohms: 200 Watts RMS

- MID WAY:

@14.4VDC - 4 Ohms: 30 Watts RMS
- HIGH WAY:

@14.4VDC - 4 Ohms: 30 Watts RMS
Frequency Response- LOW WAY: 35Hz (-3dB) ~ 1KHz (-6dB)
-MID WAY: 1KHz (-6dB) ~ 7KHz (-6dB)

-HIGH WAY: 7KHz (-6dB) ~ 50KHz (-3db))
Crossover High Pass (HPF)-
Crossover Low Pass (LPF)-
Bass Boost-
Efficiency-
Output Impedance- LOW Output: 2 Ohms
-MID & HIGH Output: 4 Ohms
Minimum Supply Voltage9VDC
Maximum Power Supply Voltage16VDC
Positive / Negative Power Supply Cable11 AWG (4 mm²)
Output cables wire gauge-LOW Output: 13 AWG (2.5 mm²)
-MID & HIGH Output: 15 AWG (1.5 mm²)
Remote Cable18 AWG (0.75 mm²)
Protection fuse or circuit breaker20A
Dimensions (W x H x D)5.43" x 1.93" x 5.20" (138 x 49 x 132 mm)
Weight1.38 lbs (0.625 Kg)

Calcule o valor do frete e prazo de entrega para a sua região

400 TRIO

With convenience and quality in mind, Taramps designed the 400 TRIO! As the name says, it is intended for 3-way systems, or trio boxes for car audio. It is a 3-way amplifier, which in addition to having an individual level, features pre-defined frequency cuts LOW output for speakers with cutoffs between 35Hz and 1 KHz, MID output for Drivers with cutoffs between 1 KHz up to 7KHZ and HIGH output for Super Tweeters with cutoff from 7KHZ to 50 KHz. The LOW delivers 340 Watts RMS at 2 ohms or 200 Watts RMS at 4ohms, and outputs MID and HIGH deliver 30 Watts RMS. In addition to the traditional RCA input, it also has a wired input with ART technology, which allows you to connect the amplified outputs of the player. It also has a built-in limiter, which acts when there is audio distortion of up to 1%, so you will be able to enjoy the full power of your amplifier with a maximum of 1% distortion, thus, protecting the speaker. Therefore, if you are looking for a 3-way car audio system, the 400 TRIO is an excellent choice! Welcome to the audio world of Taramps.


Functions and Inputs

LED ON Indicates amplifier is on. LOW LEVEL Adjusts the signal level of the LOW OUT. MID LEVEL Adjusts the signal level of the MID OUT. HIGH LEVEL Adjusts the signal level of the HIGH OUT. INPUT (RCA) Inputs of signals to be amplified. INPUT FOR SIGNALS (HIGH LEVEL) Signal input connectors (L/R) to be amplified.


Outputs and Power Supply Connector

NEGATIVE POWER SUPPLY TERMINAL A 4mm² (11 AWG) cable must be used, connected to the negative battery pole. POSITIVE POWER SUPPLY TERMINAL Use a 4mm² (11 AWG) cable directly from the positive battery terminal with fuse (20A) as close as possible from the battery. LOW OUT Output for low frequency loudspeakers connection. MID OUT Output for mid frequency transducers connection (horns and tweeters). HIGH OUT Output for high frequency transducers connection (horns and tweeters).


Technical Features

Operation ClassClass D
Number of Channels03
Maximum PowerLow output
@14,4 VDC – 2 Ohms: 340 Watts RMS
@14,4 VDC – 4 Ohms: 200 Watts RMS
Mid output
@14,4 VDC – 4 Ohms: 30 Watts RMS
High output
@14,4 VDC – 4 Ohms: 30 Watts RMS
INPUT SENSITIVITY250mV
Frequency ResponseLow output
35Hz (-3dB) ~ 1KHz (-6dB)
Mid output
1KHz (-6dB) ~ 7KHz (-6dB)
High output
7KHz (-6dB) ~ 50KHz (-3dB)
Protection SystemShort circuit and thermal protection
Maximum Music Consumption15A
Maximum Consumption in Sinusoidal Signal30A
Dimensions(H X W X D)5.43" x 1.93" x 5.20"
Weight1.38lb

Warranty

1 year warranty

Taramps recommends that the installation be done by a specialized professional and is not responsible for the misuse of the product.